All Products Painted Blacktical
"Rifleman Training Targets"...  "Because Riflemen Persist"!  Let Freedom Ring!!!
Copyright ©2013-2017 Rifleman Training Targets.  All Rights Reserved
"Spinner Targets" are available in Various Round Sizes allowing for Unlimited Scenarios and a Fun time shooting for the New and Experienced shooter.  Use with the "Modular Target Stand" for shooting with a Rifle OR use for an inexpensive "Plate Rack" for Pistol  OR with the "T-Post Modular Target Bracket", For Pistol Only.
These Targets are:

* Targets that Naturally Reset after impact and that hang 10-degrees away from the shooter to allow
   for downward deflection of the projectile.

* For Rifle Shooting or for an inexpensive "Plate Rack" for Pistol.

* Targets that give you an Instant Audio Response!  No more going down range to check paper!

* Allow Multiple Hanging Targets.

* Easy to Transport and Setup with a small Storage Footprint.

* Made in the USA from American made, Certified 3/8-inch thick AR500 Steel.
"Spinner Targets"
Requires:  "Modular Target Stand" or the "T-Post Modular Target Bracket"
Description:

"Spinner Targets"
are available in various size of Round Targets and are ready to shoot, slide them onto the "Modular Target Stand" or  from the sides of the "T-Post Modular Target Bracket".  "Spinner Targets" are Made in the USA from American Made, Certified 3/8-inch thick AR500 Steel, Cut the Superior way, with a Computer Guided "Laser" (maintains hardness) and are designed so that they hang 10-degrees away from the  shooter to allow downward deflection of the projectile, these Targets will naturally reset after impact.  Included with "Spinner Targets" are two (2) Target Collars which keep Targets in place, this allows for spacing of Multiple hanging Targets. 



Directions for Assembling the "Spinner Targets":

Slide the "Spinner Targets" onto the horizontal Rebar of the "Modular Target Stand" or the "T-Post Modular Target Bracket" with a Target Collar on each side of it to keep it in place, this will allow you to space and hang multiple Targets (pending overall weight of Targets).

When using the Target Collars use "Blue" LOCTITE or equivalent on the set screws prior to tightening.

DO NOT Shoot "Spinner Targets" with a Rifle on the "T-Post Modular Target Bracket" it is for Pistol Only!


"Spinner Targets" are Easy to Transport and Setup with a small Storage Footprint.

Made in the USA!  Designed and Built to last by Riflemen!
Instructions included with all products.
Important:  Maintain a Minimum Distance of 100-yards with a Center Fire Rifle and 15-yards with a Pistol NO CLOSER!

Do Not shoot steel with projectiles with a speed greater the 3100fps at the muzzle, no matter the caliber.

NEVER Shoot Targets with "Steel Core" or "Armor Penetrating" Rounds.

Following these guidelines will make your Target last a long time. 

Rifleman Training Targets is Not Responsible for Improperly Used Targets.

Purchaser Assumes ALL Risk and Responsibility for Any and All Accidents
.

Safe Shooting is No Accident
!!  WEAR APPROPRIATE SAFETY GEAR.
  2" Round (1.3 lbs.)     $25.00
  2.5" Round (1.5 lbs.)  $25.50
  4" Round (2.3 lbs.)     $29.00
  6" Round (4.2 lbs.)     $34.00
  8" Round (6.4 lbs.)     $41.00
10" Round (9.75 lbs.)  Coming Soon
12" Round (13.5 lbs.)  Coming Soon
16" Round (23.25 lbs.) Coming Soon
20" Round (35.5 lbs.)  Coming Soon
  5" Round (3.4 lbs.)     $32.00
Over 50 different available Targets!
Developing the "Flash Gong"!!
Back
Next

Targets for all of the Shooting Sports!

 
Rifleman Training Targets