All Products Painted Blacktical
These Targets are:
* Instant Visual Impact Conformation Even at Extreme Distances.
* Great for a Match and Competitions NO second guessing.
* Use with 55-grain and heavier bullets.
* Fun to Shoot for the New and Experienced shooter.
* Easy to Transport and Setup with a small Storage Footprint.
* Made in the USA from American made, Certified 3/8-inch thick AR500 Steel.
"Rifleman Training Targets"... "Because Riflemen Persist"! Let Freedom Ring!!!
Copyright ©2013-2017 Rifleman Training Targets. All Rights Reserved
"Flash Gong Target"
The "Flash Gong Target" is available in 6, 10 and 12-inch, they are made in the USA from American made, Certified 3/8-inch thick AR500 Steel, Cut the Superior way, with a Computer Guided "Laser" (maintains hardness). The "Flash Gong" is for Center Fire Rifles, to be shot at 100-yards and further, they are sold with the "Modular Target Stand" and all the necessary hardware including one (1) 12-gauge Target Flash, one (1) 3/8-inch thick Target Bracket, two (2) Grade 8 Bolts, two (2) Nylon Lock Nuts and two (2) Target Collars. You will need to supply five (5) sticks of 1/2-inch Rebar, 4-foot long to build the "Modular Target Stand".
Directions for Assembling the "Flash Gong Target":
First turn the front of the Target face down and then insert the two (2) Grade 8 Bolts up through the front, then place the Target Flash onto the Bolts. The Orange part of the Target Flash will be orientated away from the Round part of the Target and will be horizontal once the Target in on the Stand. Once the Target Flash in on the Bolts, place the Target Bracket onto the Bolts with the tube at the bottom, off set to the rear. Then place the Lock Washers onto the Bolts and thread the Nylon Lock Nuts onto the Bolts and tighten, good and snug. Now slide your Target onto the "Modular Target Stand" with the "Flash" and Target Bracket" to the rear, follow the directions for building the "Modular Target Stand". Place a Target Collar on each side of the Target Bracket. When using the using the Target Collars use "Blue" LOCTITE or equivalent on the set screws prior to tightening.
The "Flash Gong" is Easy to Transport and Setup with a small Storage Footprint.
Made in the USA! Designed and Built to last by Riflemen!
The "Flash Gong Target" is for Center Fire Rifles and is the Best way to Confirm Impacts at Extreme Distances. When Impacted the "Flash Gong Target" indicates with a Visual orange Flash, eliminating any second guessing. They are sold with the "Modular Target Stand" and all necessary hardware.
Click on Images to Enlarge
Important: Maintain a Minimum Distance of 100-yards with a Center Fire Rifle and 15-yards with a Pistol NO CLOSER!
Do Not shoot steel with projectiles with a speed greater the 3100fps at the muzzle, no matter the caliber.
NEVER Shoot Targets with "Steel Core" or "Armor Penetrating" Rounds.
Following these guidelines will make your Target last a long time.
Rifleman Training Targets is Not Responsible for Improperly Used Targets.
Purchaser Assumes ALL Risk and Responsibility for Any and All Accidents.
Safe Shooting is No Accident!! WEAR APPROPRIATE SAFETY GEAR.
NEW 6" Flash Gong ( 13.75 lbs.) $175.00
12" Flash Gong ( 25.25 lbs.) $210.00
10" Flash Gong ( 21.25 lbs.) $200.00
Targets for all of the Shooting Sports!
Rifleman Training Targets